Vita Spa L700C keypad | HELP! | Forum

Just tried to set up the spa for use, turned it on and the time displayed, the jets and heater started and I had no control over anything else. I let it run for 30 minutes till the pumps stopped. Heater was still on, still no jet, light or bubbler control. Can't set the time either. I was able to reset to factory specs but powering down for 15 minutes, powering on and holding view for 10 seconds but that's pretty much all the control I have. I had a look at the circuit board and didn't see anything out of the ordinary. the single glass fuse still had a filament and the other 2 (250V) were opaque so I don't know if they were good or not. Any suggestions? Thanks